Which manufacturing method you choose makes all the difference in the outcome of your project.
However, knowing which method to use isn't always so obvious. Two techniques that stand out amongst all the options are 3D printing and vacuum casting. Each method offers distinctive strengths and advantages that are uniquely suited to a variety of situations.
In short, 3D printing brings a quick, flexible, and precise process tailored for prototyping and limited batch production; vacuum casting offers a cost-effective solution that shines in high-quality, low to medium-volume production.
Let's dive a little deeper into the pros and cons of each method.
The Manufacturing Process: 3D Printing vs. Vacuum Casting
There are many different 3D printing technologies for polymers, such as Fused Deposition Modeling, Multi Jet Fusion, and Stereolithography. The underlying technology, materials, and printing capabilities all vary between these manufacturing methods, but the process is generally the same.
First, a digital design is brought to life using CAD software. This design is then processed by slicing software which interprets it into layers for the 3D printer to follow. Next, the 3D printer creates the part layer by layer, following the prepared instructions. Finally, the part generally needs post-processing, including support removal, sanding, or painting.
Vacuum casting relies on molds to create detailed parts.
First, a master pattern is created using conventional machining or 3D printing. The master pattern is encased in silicone, forming a mold. Next, the mold is then filled with a material. Once hardened, the mold is removed, revealing the cast part. The mold can be reused approximately 20 times before a new mold is needed.
Choosing the Best Fit
Production Costs: Varies
3D printing is usually more cost-effective for small-volume production. As production volume increases, the cost per part decreases, making vacuum casting the more economical choice for larger batch production, even though the mold can only be used approximately 20 times before requiring a replacement.
Strength: Vacuum Casting
Both manufacturing technologies can have strong parts, but 3D printed parts may exhibit anisotropy. This means their strength can vary depending on the direction of applied force due to the layer-by-layer construction. On the other hand, vacuum casting uses two-component polyurethane resins, which can mimic a wide range of plastics and thus achieve different strength characteristics without suffering from anisotropy.
Tooling Costs: 3D Printing
3D printing sidesteps the need for expensive molds or tooling; all that's required is a 3D model and a printer. Vacuum casting, however, involves the creation of silicone molds for each part. While these molds are less expensive than those used in other manufacturing processes, they constitute an initial upfront cost.
Design Freedom: 3D Printing
3D printing creates intricate geometries that would be challenging, if not impossible, to achieve with traditional manufacturing methods. Vacuum casting's capacity to handle complexity is contingent on the master model. While highly-detailed parts are possible, the presence of very intricate features or undercuts can complicate the mold-making process.
Production Speed: Varies
3D printing excels in speed for low-volume production and prototyping, often delivering a finished part within hours. Conversely, vacuum casting, although slower in process speed due to mold creation and curing, can be faster per part when factoring in batch production. On the MakerVerse platform, you can expect lead times starting at 6 days for 3D printing technologies such as Fused Deposition Modeling. Vacuum casting lead times start at 9 days, comparable to some of the other polymer 3D printing technologies.
Finishes: Vacuum Casting
Vacuum casting replicates the surface of the master model in great detail, including textures and logos, often requiring less post-processing. Therefore, vacuum casting might be more suitable if a project prioritizes a superior, ready-to-use surface finish. While 3D printing, particularly with high-resolution techniques like Stereolithography (SLA), can produce detailed parts, it often exhibits layer lines requiring further post-processing for a smoother finish.
Getting Started with Vacuum Casting and 3D Printing
3D printing, with its speed, design versatility, and suitability for low-volume production, has carved a unique niche for rapid prototyping and personalized parts. In contrast, with its inherent strength and excellent surface finish, Vacuum Casting is a top choice for durable, high-quality parts in low to medium volumes.
Embarking on a manufacturing journey and unsure which technology to choose? Contact us today to get started with either 3D Printing or Vacuum Casting. We are here to guide you every step of the way.